Yes. We provide a detailed installation manual and step-by-step installation videos to guide you through the process. However, since this will not be installed by a contractor recommended by CleaDeep, customers will be responsible for any damages or problems caused during installation.

1、Electric Screw Driver
2、Electric
3、Silicone Gun Pipe
4、Gloves
5、Duct Reducer
Note: Only required when adapting to a smaller duct size (e.g., 150 mm).
6、Wall Scanner
7、Utility Knife
8、Tin Snips
9、Philips Screwdriver
10、Marker Pen
11、Tape Measure
12、Gradienter
13、Rolls Clear Plastic Sheeting

Yes, We offer range hood installation services and supply range hood installation hardware.

You can choose from two service options: Basic Installation ($199) or Full Installation ($299, which includes removal of your old unit).

CleaDeep range hoods are easy to install! We provide detailed instructions in the user manual included with your range hood. You can also find helpful resources on our blog and installation tutorials on our YouTube channel. Additionally, we offer professional installation services to ensure a hassle-free experience.

Before starting the installation, unbox your range hood and verify that all components are included. Once confirmed, follow the step-by-step instructions in the user manual for a smooth installation. Then, connect it to a power source and test its functions to ensure everything is working correctly. If you need additional guidance, visit our blog for helpful tips or watch our detailed installation tutorials on YouTube.

Main Components

• 1 × Kitchen Hood
• 1 × Hanging Plate
• 1 × Outlet Duct (Ø150 mm)
• 1 × Oil Cup
• 1 × Air Vent
• 2 × Smoke Screens
• 1 × Instruction Manual

Mounting Hardware & Accessories

• 1 × Self-Tapping Screw (ST4×8)
• 2 × Self-Tapping Screws (ST4×12)
• 4 × Expansion Tubes (10×50 mm)
• 4 × Wood Screws (ST5×50)
• 2 × Aluminium Foil Tapes (60×1400 mm)
• 4 × Self-Tapping Screws (M4×20)

You can contact our customer service for assistance. Please provide the following details to help determine if installation is suitable:

Front view image or video of the cabinet.

Dimensions of the previous range hood or stove.

(If available) Feedback on the depth of the upper cabinet.

(If available) Diameter of the existing duct.

Reserve a duct with a Ø160 mm (6.30") diameter at the air outlet for installing the exhaust pipe.

Use the standard three-layer thickened pipe 150 mm (5.91") when possible.

Ensure the pipe has no bulges and the joints are tightly sealed.

The total pipe length should not exceed 3m (118"), and it should not be bent more than twice.

If a replacement is not possible and the existing pipe is less than 150mm (5.91") in diameter, a reducer ring may be used, ensuring the connection is well sealed.

The recommended vertical distance between the cooktop surface and the bottom of the range hood is 690–740 mm (27.1"–29.13"). Installing it within this range ensures optimal smoke and odor extraction.

• Reserve a cabinet widthmust be ≥900 mm (35.43") to accommodate the hood’s front panel.
• Leave a bottom cabinet clearance of ≥430 mm (W) × ≥330 mm (D) (16.93" (W) × ≥12.99" (D)) for proper hood insertion.
• A depth of 450 mm (17.72") is recommended for easier installation and cable routing.
• The cabinet back panel must include a service opening of 430 mm (W) × 460 mm (H) (16.93" (W) × 18.11" (H)) for duct connection and maintenance access.

CleaDeep IQV Hood requires a 110V/50Hz power supply with a minimum 10A circuit. It should be hardwired or plugged into a grounded outlet.

A 160 mm (6.30 ") round or equivalent rectangular duct is recommended for optimal airflow.

If your cooktop's manual specifies a greater clearance than 740 mm(29.13"), you should follow the cooktop’s requirement to maintain safety and compliance.

The absolute minimum distance is 650 mm (25.6"). If the hood is installed lower than this, components below this line must be non-flammable and low voltage to ensure safety.

A minimum of 150 mm (5.91 ") of vertical space is required above the unit to allow for duct routing into the ceiling or upper cabinet.

There should be at least 200 mm (7.87") of space in the ceiling cavity to route the vertical exhaust duct effectively.

Yes. For wall-mounted installations, ensure the total height from cooktop to duct outlet is 1462–1512 mm (57.56"–59.49 "), with the hood height itself being 977 mm (38.46 inches).

The total duct length should not exceed 3 meters (118") with no more than two 90-degree bends.

To ensure your hood functions at optimal capacity, we do not recommend sizing your hood to a width that is less than the width of your range.

Yes, but ensure the duct size and direction match the hood’s requirements for efficient ventilation.

Extend the air outlet at least 30 mm(1.18 inches)out of the wall, and angle it slightly downward to prevent rainwater from entering.

No, this model is designed for wall-mounted or under-cabinet installations.

Yes, a range hood can be installed on a tile wall. However, proper drilling and secure mounting are required. It’s recommended to use appropriate anchors and screws to ensure stability.

Range hoods need to be installed to secure studs or supports. Wall anchors can be used for additional support and vary depending on wall material and the weight of the installed range hood.

Use the provided mounting brackets and ensure they are attached to wall studs for stability.

The maximum recommended duct length is 118 inches, with each 90-degree turn reducing it by 5 feet.

Check with local building codes, as some areas require permits for electrical work.

Depending on the model, some cabinets may need to be modified to accommodate the range hood. Please refer to the installation manual for specific instructions.

Wave your hand within 5 inches of the sensor:

Wave left to right to turn it on or increase the fan speed. Wave right to left to lower the speed or turn it off. It's touch-free, fast, and convenient—perfect for busy cooking moments.

If the range hood doesn't fit, consider a custom installation or consult with a professional installer for suggestions on adjusting your setup.

Grounding prevents electric shock by providing a safe path for electrical current in case of a short circuit.

Plug the appliance into a properly installed and grounded outlet. If unsure, consult a qualified electrician.

No, using an extension cord is not recommended. If the power cord is too short, install a nearby outlet with the help of a qualified electrician.

Press and hold the "light button" and "wind speed button" for 3 seconds at the same time to turn on or off the gesture sensing function, and the buzzer will make a "ding" sound.

Important Note:

• Prior to installation, please read the CleaDeep Range Hood Installation Guide carefully and retain it for future reference by local inspectors.
• This appliance must be installed in accordance with the National Electrical Code (NEC) and all applicable state, municipal, and local codes.
• Ensure the appliance is connected to a dedicated circuit with proper grounding.
• The correct voltage, frequency, and amperage must be supplied according to the product rating plate.
• Record the model and serial number before installation for future reference.

Caution:

Please carefully read all instructions prior to installation and pay special attention to the following:

Warning:

To reduce the risk of fire, electric shock, or personal injury, please follow these safety measures:

• Only a licensed electrician should perform the electrical wiring and installation in compliance with national and local safety codes.
• Non-standard installations or modifications by unqualified personnel are the responsibility of the installer and may void the warranty.
• Use only the provided expansion bolts and tubes to securely fasten the range hood to the wall.
• Ensure the drilled wall holes precisely match the expansion tubes for a secure fit.
• Do not use extension cords, prolonged wiring, or multiple power strips, as this may cause overheating or fire hazards.
• Always turn off the circuit breaker before installation, maintenance, or repair.
• If the power cord is damaged, it must be replaced by a qualified technician using manufacturer-approved components.
• Wear protective gloves during installation to avoid injury from sharp edges.

Before Installation:

• Ensure the exhaust outlet is free of debris to prevent damage to the range hood.
• For optimal performance, use a short and straight duct run.
• Avoid long and curved duct runs, as they reduce the efficiency of smoke extraction.
• Properly seal the duct connections with aluminum tape to prevent air leaks.
• The recommended duct hole size should be Ø160 mm (6.30 inches) in diameter to maintain efficient airflow.

By following these guidelines, you can ensure a safe and effective installation of your CleaDeep Range Hood.